General Specifications of Transceiver NSC-1 ............12 Transceiver NSC-1 Introduction .................. 13 Functional Description ....................13 Interconnection Diagram ...................14 Nokia 5160/5120 cellular telephone (NSC-1*/NSW-1*) NAM programming ..14 Menu Driven Easy NAM Programming ..............15 Complete NAM Programming Instructions ..............15 Access NAM Programming Mode: ................15 MAIN MENU Selection ....................15...
Page 4
NSC-1 General Information and NAM Programming PAMS Technical Documentation Nokia Mobile Phones Ltd. Page 4 Issue 4 03/01...
- Software module (Basic SW ) 0240647 On flash memory Standard Color front covers Color: Part code: Tango Orange 0261857 Antiqua Red 0261858 Gheko Green 0261859 Bermuda Blue 0261860 Dolphin Silver 0261861 Nokia Mobile Phones Ltd. Issue 4 03/01 Page 11...
VCTCXO; AFC used in analog and digital modes Receiver type Double conversion, common IF frequencies in all modes Modulator type I/Q modulation in digital modes, FM modulation in analog modes Nokia Mobile Phones Ltd. Page 12 Issue 4 03/01...
— consists of two different states (i.e., charge mode and maintenance mode). The charge mode is effective in parallel with all previous modes. • local mode — used for alignment and testing. Nokia Mobile Phones Ltd. Issue 4 03/01 Page 13...
Nokia 5160/5120 cellular telephone (NSC-1*/NSW-1*) NAM programming instructions All Nokia 5160/5120 cellular telephones (with software version 1.6 or later) are capable of supporting both Random and Default authentication methods. The programmer must decide which form of A-Key is desired for use. There are two methods to program the NAM described below.
Select from the following: NAM 1 NAM 2 Security Emergency SW version Serial No. Field Test 5 Press the [Select] softkey to access the Sub-Menu from and of the above Main Nokia Mobile Phones Ltd. Issue 4 03/01 Page 15...
4 digits of the new Security Code. Programming Emergency numbers: 13 From the Main Menu use the Scroll key to select the ”Emergency” Sub-Menu, press the [Select] softkey to access the emergency numbers. Nokia Mobile Phones Ltd. Page 16 Issue 4 03/01...
IS-136. To activate the Field Test Display Mode you must be in NAM programming. Instructions for entering NAM programming are on the previous pages. Nokia Mobile Phones Ltd. Issue 4 03/01 Page 17...
PSIDS and RSIDS: rogramming The Nokia 5160/5120 provides the option to program Private (PSIDs) and Residential (RSIDs) System IDs as prescribed by IS-136. The PSID / RSID list is programmed to sup- port system selection / re-selection processes, and SID display functions. The Nokia 5160/5120 product will support up to 15 different Private or Residential Systems.
Page 19
= 010, These (inter)national SOC values are only an approximation from available infor- mation. Please call Customer Service (888-Nokia-2U) with corrections. Country code: Enter the Country Code of the PSID / RSID. Public service profiles: Contains up to four channel and color code values for each private or residential system.
Page 20
NSC-1 General Information and NAM Programming PAMS Technical Documentation This page intentionally left blank. Nokia Mobile Phones Ltd. Page 20 Issue 4 03/01...
Need help?
Do you have a question about the NSC-1 Series and is the answer not in the manual?
Questions and answers