Detachable Control Panel - Boss marine MR1470UW User Manual

5. DETACHABLE CONTROL PANEL (D.C.P .)
Removing The Detachable Control Panel (D.C.P .).
PANEL RELEASE
BUTTON
Attaching the DCP
2
A
B
CAUTION
DO NOT insert the D.C.P from the left side. Doing so may damage it.
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop
it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent
damage to the D.C.P , always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to
damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Socket
1. Turn the power off
2. Press the D.C.P . release button
3. Remove the D.C.P .
1. Attach the panel at the right side first, with
point B on the main unit touching point A on
the D.C.P . (As shown on the digram).
2. Then press the left side of D.C.P . onto the main
unit until a click sound is heard.
Note:
If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on the
back of the D.C.P .
7