Sos Setting - easyteck T116 Manual

Settings
Tone settings
Use this function, you can set the personality phone ring in different situations and mobile
phone related prompt operation.
In standby mode, select [menu], and select the scenario model.
Into this function, display scene model list, including Ring only,vib.only,vib.and ring,vib.then
ring.
Phone settings
Under the standby interface, press [determine] to enter the main menu, then select Settings
menu, in turn into the mobile phone application Settings interface. You can see the following
Settings:
Time and date: you can set the time/date.
Language: used to change the language of the text displayed on the phone's screen.
Pref. input method: can set the default input method. In the edit interface by default the first
law of input is the set of input.
Display: Set wallpaper, display the date time, standby operators name display Settings.
32
Flight mode: set the phone to flight mode or normal mode by default.
LCD backlight: set the phone's screen and screen time control.
SOS Settings
Can be set in this number for help. Mobile phone after starting the SOS key, the machine is
take the initiative to send text messages and calls to set the number for help.
- After send the SOS message, there will be a SOS single on the standby surface, indicate
that the phone is under SOS. The situation will be keep on in 1 hour. Would be automatically
back to normal situation if there is no incoming-call or out -call.
- Within 1 hour of SOS situation, there will be a ring remind for the first incoming call, then
automatically answer and go the hands free call. SOS icon will be dispeared while the call
finished. After, any new incoming calls should be press answer key to get the call.
C. Within 1 hour of SOS situation, can long-press the hang key to end the SOS.
SOS Message: is there a phone default for help information content, information content and
can be edited again for help.
SOS Numbers: editable 5 emergency number.
Status: open or closed emergency call.
33