easyteck T116 Manual page 10

4.Insert the battery.
5.Insert the battery cover.
Charge the battery
When the battery is low, mobile phone will issue a warning sound, according to deficiency of
information, and a corresponding battery icon instructions. In this case, may not be able to
use a mobile phone part of the function.
If the battery is too low, the mobile phone will automatically be turned off. Mobile phone
battery, please.
Cellphone when charging, the battery icon will flash on the screen. Charging is completed, will
be displayed on the screen with the battery icon. Phone charging, the screen will be displayed
on the charging status screen. Charging is completed, the screen will be displayed on the
charging tips. Standby mode, the charging time about 2 to 3 hours.
1.Insert the charger into the ac power socket.
2.Connect the charger to the phone.
3.In charge the symbol onthehescreen. (if the battery has been completely exhausted, you
may need to wait for a few minutes, charging the symbol will appear on the screen.)
4.Charging is completed, remove the charger from the power outlet, then remove the charger
18
from the phone.
Start-up and shutdown
In shutdown state, long press/hang up button boot.
In the boot state, long press/hang up button off.
Memory card
Phone support T - Flash card (available separately), T - Flash card is a kind of multimedia me-
mory card for mobile phone more memory. This card is small, need to be careful and cautious
when install or remove, in order to avoid damage.
1.turn off the phone, remove battery and other external power source;
2.according to the mobile phone inside the pie chart, to face the T - Flash card metal, parallel
insert T - Flash card slot;
3.when you need to take out the T - Flash card, please turn it off, take out the battery, pull T -
Flash card from the card slot.
19