Setting Mode - Boss Audio Systems 758DBI User Manual

Setting Mode

You can make changes to the system setting in the following area:
Radio Frequency Range + Enable/Disable AUX In+ Clock Format
To enter setting mode, input the following command by pressing remote
keys 8, DOWN DIRECTION KEY, 9, ENTER "
The display will show TEST MOD breifly to indicate you are in "
system setting area and then automatically change to Radio Frequency
selection mode. At anytime, you can press the
the above areas. When you are ready to leave the System Setting area,
press ENTER. The unit will reboot to initialize with the new setting.
- Radio Settings
The unit can operate on several different frequency ranges. Please see
the following for these ranges.
BAND NAME FREQUENCY RANGE
AMERICA 1 FM:87.5-107.9MHz
AMERICA 2 FM:87.5-108MHz
AMERICA 3 FM:87.5-107.9MHz
EUROPE FM:87.5-108 MHz
MIDEAST FM:87.5-108MHz
AUST(AUSTRALIA) FM:87.5-108MHz
RUSSIA FM:65.0-108MHz
To change the range to suit your location, press DOWN ARROW unit
the desired frequency range is hight lighted. The press ENTER
to save it and move to next setting area.
- AUX Input Enable/Disable
Press DOWN ARROW to move between Enable and Disable modes.
When the selection has been made, press ENTER to save it and move to
next setting area.
If AUX Input is disable in System Settings, any input connected will not
be played.
- Clock Format (12-hour or 24-hour)
Press DOWN ARROW to move between
press ENTER to save it and turn off this unit.
PDF created with FinePrint pdfFactory trial version
"
"
DOWN ARROW to step through
AM:530-1710kHz
AM:520-1620kHz
AM:530-1620kHz
AM:522-1620kHz
AM:531-1602kHz
AM:522-1710kHz
AM:522-1620kHz
12-hour or 24-hour format,
Page 10
http://www.pdffactory.com
General and Radio Controls
7 5 3 11 1 9
RPT
RDM
1 2 3 TA
2 MODE
ENTER
4 5 6
AF
+10
-10
6 8 10 12
1. VOLUME UP/DOWN KNOB (turn)& AUDIO MODE SELECTOE (push)
In normal mode, use this knob to increase or decrease the volume level.
To access the various sound parameters push the knob (like a button) to cycle
through the following adjustable settings:
VOLUME -> BASS ->TREBLE -> BALANCE -> FADER
Use the knob to increase or decrease the settings for Volume, Bass, Treble,
Balance and Fader.
In each mode, the waiting time is about 5 seconds, and the time waiting time
is over, it returns to the last display mode .
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
Push and hold the knob (like a button) for more than 2 seconds to turn on
TA ON/TA OFF, then push it and repeatedly to select TA SEEK/TA ALARM,
PI SOUND/PI MUTE, RETUNE S/RETUNE L, MASK DPI/MASK ALL, BEEP ON
/BEEP OFF, USER SET(FLAT, CLASSIC, ROCK, POP), VOL LAST/ VOL DEFA,
STEREO/MONO (in RADIO mode) , LOUND ON/LOUND OFF,
DX/LOCAL (in RADIO mode) , CLK ON/CLK OFF, CLK 12/CLK 24 mode.
Use the knob to increase or decrease the settings for these functions.
2. POWER/MUTE
Press POWER to turn unit on. Press the button to MUTE the audio. Press and
hold POWER to turn it off.
3. MODE (Input Select)
Press this button repeatedly to cycle through the audio input sources:
BLUETOOTH > AUX >TUNER > USB > CARD > IPOD
Please note:
iPod Mode can only be selected if an iPod is present in the dock.
Page 1
AUX IN
4