Advertisement

WDH-070EBP
WARNING · · · · · · · · · · · · · · · · · · · · · · · · · ·
· · · · · · ·
2-3
CAUTIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4-5
FUNCTION EXPLANATION · · · · · · · · · · · · · · · · · · · · · · 6
OPERATING INSTRUCTIONS · · · · · · · · · · · · · · · · · · · · 7
CONTINUOUS DRAINAGE OPTIONS · · · · · · · · · · · · · · 8
MAINTENANCE / EMERGENCY · · · · · · · · · · · · · · · · · · 9
SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · LAST PAGE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ausclimate WDH-070EBP and is the answer not in the manual?

Questions and answers

Summary of Contents for NEW WIDETECH ausclimate WDH-070EBP

  • Page 1: Table Of Contents

    WDH-070EBP WARNING · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · CAUTIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4-5 DESCRIPTION OF COMPONENTS / FUNCTION EXPLANATION ·...
  • Page 2: Warning

    WARNING • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 3 WARNING Additional warnings for appliances with R290 refrigerant gas (refer to the rating plate located at rear of the appliance for the type of refrigerant gas used). READ THE MANUAL CAREFULLY BEFORE USING THE APPLIANCE • R290 refrigerant gas complies with European environmental directives. •...
  • Page 4: Cautions

    CAUTIONS Make sure the plug is Do not use multiple Do not fold the power cord as shown below. placed fully & firm into sockets as shown below. the socket. Make sure the plug Do not have wet hands After turning the unit off, is clean.
  • Page 5 CAUTIONS Do not pull the power cord, Do not use insect, oil or paint spray which may break and cause danger. around the machine. They might cause damage to the plastic parts or start a fire. Do not place the machine on uneven ground.
  • Page 6: Description Of Components

    DESCRIPTION OF COMPONENTS Control panel Dehumidified dry air vent Handle Moist air intake Air filter Automatic water pump-out option Water tank Continuous drainage option Roller castors FUNCTION EXPLANATION BUCKET FULL LIGHT DEFROST LIGHT CURRENT TEMP / TIMER SET DISPLAY Water tank is full when When the defrost light is When machine is running, it displays the current room temperature.
  • Page 7: Operating Instructions

    OPERATING INSTRUCTIONS Start Operation 1) Place the dehumidifier in an upright position on a flat, stable and heat-resistant surface. Make sure there is nothing flammable or heat sensitive within 100cm (39 inches). Operating the appliance in any other position could cause a hazard. 2) Insert the power plug into a suitable power socket.
  • Page 8: Continuous Drainage Options

    CONTINUOUS DRAINAGE OPTIONS Continuous drainage is an additional method of removing collected water from the dehumidifier. Instead of manually emptying the water tank, the User may choose this method to allow the water to bypass the water tank and flow directly from the dehumidifier via a drain hose or pump- out drain hose.The following steps are useful when there are good conditions for drainage near the dehumidifier.
  • Page 9: Maintenance / Emergency

    MAINTENANCE Before cleaning the dehumidifier, first ensure that the appliance is disconnected from the power supply. Outer case: Wipe the shell with a soft, slightly damp cloth. Do not immerse in any liquid. Dry with a dry cloth. Do not use harsh abrasives or solvents. Air filter cleaning: Air filter cleans the dust and impurities from the air which may hinder the dehumidifying function, these should be regularly cleaned.
  • Page 10: R290 Authorised Repairer Instructions

    INSTRUCTION FOR REPAIRING APPLIANCES CONTAINING R 290 AUTHORISED PERSONS ONLY! 1. Checks to the area Prior to beginning any authorised work on systems containing flammable refrigerants, safety checks are necessary to ensure that the risk of ignition is minimised. The following precautions shall be complied with prior to conducting work on the system.
  • Page 11 INSTRUCTION FOR REPAIRING APPLIANCES CONTAINING R 290 AUTHORISED PERSONS ONLY! - that capacitors are discharged; this shall be done in a safe manner to avoid possibility of sparking. - that there are no live electrical components and wiring are exposed while charging, recovering or purging the system;...
  • Page 12 INSTRUCTION FOR REPAIRING APPLIANCES CONTAINING R 290 AUTHORISED PERSONS ONLY! Oxygen free nitrogen (OFN) shall then be purged through the system both before and during the brazing process. 15. Removal and evacuation When breaking into the refrigerant circuit to make repairs – or for any other purpose – conventional procedures shall be used.
  • Page 13 INSTRUCTION FOR REPAIRING APPLIANCES CONTAINING R 290 AUTHORISED PERSONS ONLY! f) Make sure the cylinder is situated on the scales before recovery takes place. g) Start the recovery machine and operate in accordance with manufacturer's instructions. h) Do not overfill cylinders. (no more than 80% volume liquid charge). i) Do not exceed the maximum working pressure of the cylinder, even temporarily.
  • Page 14: Specifications

    SPECIFICATIONS WDH-070EBP 760 W 0.182 kg TUV approval Certificate No.: TUV-025166-EA 388 x 600 x 282 mm 20.5 kg Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check your local authority of retailer for recycling advice.

Table of Contents