Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for viveroo one kiosk
Summary of Contents for viveroo one kiosk
- Page 1 User manual & Installation guide one kiosk...
-
Page 2: Safety Information
Safety information Please read the assembly instructions included carefully. Please read ! Warning this free flex user manual completely before using your free. Please follow the instructions and recommendations to ensure proper use and maximum enjoyment. free flex is intended for use in enclosed and dry living spaces. Safety information The following conditions must be provided:... -
Page 3: Technical Data
Removal from power supply All one kiosk have CE certification. one kiosk is quality "Made in Germany". We use only high-quality parts CE & Co. and components produced by market leaders. One kiosk customers are proud of their iPad stand. -
Page 4: Delivery Contents
Installation Mounting of one kiosk with power cable (Lightning and USB-C) pp 5-7 Mounting of one kiosk with PoE Adapter pp 8-9 If you use an iPad Pro with USB-C Adapter in combination with PoE, please directly skip to 2.6 Mounting of Accessory „Scanning Module“... -
Page 5: Installation
If you use an iPad Pro with USB-C cable, the installation works similarly. You only have a USB-C instead of the Lightning cable. If you use the one kiosk with a PoE Adapter, please see 2 (pp 8-9). Step 1.1 Make sure that all of the felt points are stuck to the appropriate place on the cover. - Page 6 Installation Step 1.3 Screw the standpipe to the stand. ! Note: The stand is mounted on the right-angled side of the tube. Step 1.4 Now run the cable through the recess in the cover and then screw the frame onto the standpipe. ! Note: You can already insert the cable into the cable duct in this step.
- Page 7 Installation Step 1.6 Cover the Lightning adapter with the closure cap. Step 1.7 Fix the closure cap with the enclosed screws. The iPad can no longer be removed from the holder without loosening the cap. free flex, User manual & Installation guide page of...
- Page 8 Installation 2. Mounting of viveroo one kiosk with a PoE Adapter. These steps describe the installation of one kiosk for iPads with the Lightning connector in combination with PoE. ! If you use an iPad Pro with USB-C Adapter, please directly skip to 2.6 Step 2.1...
- Page 9 Installation Step 2.4 Screw the stand base to the pipe. The PoE adapter disappears in the standpipe. So all connections are hidden and secured. Step 2.5 Mount the frame now To do this, follow steps 1.4 to 1.7. Step 2.6 If you are using an iPad Pro with USB-C connection and Option at the same time represent the power and data supply...
- Page 10 Installation of Accessory „Scanning Module“ Illustrations and texts are exemplary. Depending on the iPad and USB port, other power supplies or cables may be supplied. Step 3.1 Insert the adapter plate into the camera opening. If you have already inserted the camera cover (see p.5, 1.1), remove it.
-
Page 11: Warranty
Warranty free flex comes with a one year warranty from date of purchase by Warranty the original end customer, unless the device was repaired or replaced during the warranty period. In this case, the warranty is valid until the end of the regular two year warranty or six months following the repair/replacement, whichever comes first.
Need help?
Do you have a question about the one kiosk and is the answer not in the manual?
Questions and answers