Radio Operation; Cd Operation - Boss Audio Systems 606C User Manual

OPERATION
(MUT) button (2) to mute the audio
output. Press it again to release this
mode and recover previous volume
level.
• EQUALIZATION
Press EQ button (10) shortly to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
FLAT CLASS
• SELECT MODE
Press MODE button (7) repeatedly to
select among the following sources:
TUNER
If no CD is present, CD mode will be
skipped.
• LIQUID CRYSTAL DISPLAY
The LCD (19) can show the current
state of the unit.
• RESET FUNCTION
RESET button (22) must be activated
with either a ballpoint pen or thin metal
object. The RESET button is to be
activated for the following reasons:
- Initial installation of the unit when
all wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Note: If you press the RESET button
(22), and the does not come back on,
then use a cotton swab soaked in
isopropyl alcohol to clean the socket
on the front of the panel.
POP M ROCK M
CD AUX

RADIO OPERATION

• SWITCHING TO RADIO MODE
Press MODE button (7) to select radio
mode, the radio mode appears in the
display together with the memory
band.
• BAND
For the unit with two bands only, press
BND/LOU button (8) shortly to change
bands as below:
• SELECT STATION
Rotate TUNING knob (11) clockwise
or counter-clockwise to adjust the
frequency upward or downward.
• LOCAL/DISTANT
Press the LOC button (12) to select
between local setting for reception of
strong station and distant setting for
reception of weak stations when
tuning.
• MONO/STEREO
In FM band, press MON button (13)
shortly to select mono or stereo
reception for radio stations. You can
sometimes improve reception of
distant stations by selecting mono
operation.

CD OPERATION

• SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side up into the disc slot (5) until you
feel some resistance. The CD is drawn
into the driver automatically. CD
playback begins.
If a CD is already inserted in the driver:
Keep pressing MODE button (7) shortly
until the CD mode display appears.
• EJECTING A DISC
Press button (4) to stop CD play and
eject CD from slot. Receiver switches
to radio operation.
10
FM AM