Viewing Test Results Stored In Memory; Understanding Error Messages - A. Menarini Diagnostics GlucoMen Day Meter User Manual

/ 7.2

Viewing test results stored in memory

Press any button to turn the meter on. The
current date and time will be displayed on
the bottom of the screen followed by the
1 day average value and the number of
the test results saved within the current
day.
Step 2
Use the ► button to scroll
through the test results,
starting from the most re-
cent and ending with the
oldest.
Press the ◄ button to re-
turn to the results seen pre-
viously.
After checking the stored
test results, press the ●
button to turn off the meter.
NOTE: The control solution test results saved with the
with the symbol when you review the stored test results.
26
/ 8
A used test strip was inserted.
The
>
number
of tests
within
the
current
day
► button
The blood or control solution sample was
applied before the
>
and wait until the
before applying the blood or control so-
◄ button
lution sample.
The temperature during the test was abo-
ve or below the operating range.
>
is within the operating range (5–45 ˚C)
and repeat the test after the meter and
test strips have reached a temperature
symbol will be displayed within the operating range.
The blood sample has abnormally high
viscosity or insufficient volume.
>

Understanding error messages

Repeat the test with a new test strip.
symbol appeared.
Repeat the test with a new test strip
symbol appears
Move to an area where the temperature
Repeat the test with a new test strip.
27