Table of Contents
Advertisement
Step 5
At this time, the display segments will rotate clockwise while the
blood is going in. Test result will appear after the meter counts down
from 5 to 1. The result will be automatically stored in the meter's
memory. If the test strip is removed after the test result is displayed,
the meter will automatically switch off after 3 seconds. Discard used
test strips safely in disposable containers. If the Bluetooth feature
is activated, the meter will send the test result to the connected
smartphone.
NOTE: To transmit glucose data to the GlucoMen
Day CGM smartphone App using the Bluetooth
feature:
•
The Bluetooth feature on the meter must be
turned on.
•
The meter and the smartphone must be paired.
•
The GlucoMen
Day CGM must be launched.
®
The meter will transmit data in the following
cases:
•
When the strip is ejected after measuring,
•
When the meter is turned on (only when untran-
18
smitted data exists).
Test results
®
Step 6
You can attach a flag to a blood glucose test result to indicate parti-
cular situations while the strip is still in the meter. When the result is
displayed right after a test, press ◄ or ► button to select a pre-me-
al flag (
), a post-meal flag ( ), or a fasting flag (
remove the test strip while the desired flag is blinking, the test result
is stored with the flag. If you do not want to add any flags on the test
result, remove the strip after the test result is displayed.
No flag
Pre-meal flag
Step 7
Remove the strip using the ejector, and dispose of it following the
local regulations.
Step 8
Dispose of the lancet following the local regulations.
CAUTION
The lancet is for single use only. Never share or reuse a lancet.
). When you
Post-meal flag
Fasting flag
19
Advertisement
Table of Contents
