Download Print this page
Sealey CPV100 Instructions

Sealey CPV100 Instructions

Wet & dry vacuum cleaner 12v

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instruction
Manual
1.
SAFETY
WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are adhered to when using this
R
vacuum.
Never leave the vacuum running unattended. Turn the power off when not in use.

DO NOT use the vacuum to pick up the following materials:

Burning objects (lit cigarettes, charcoal)
Sharp fragments (broken glass)
Corrosive solvents
Combustable or explosive liquids (petrol or alcohol)
This vacuum is maintenance free and sealed at the time of manufacture, attempting to open it may cause damage to it.

DO NOT pull or carry the vacuum by the cord or the hose.

DO NOT operate the vacuum outdoors when it is raining or in wet conditions.

To prolong the service life of the vacuum allow it to cool down for 30 minutes after each continuous running time of 20 minutes.

The vacuum must only be operated on a 12V power supply from the accessory socket in the vehicle. NEVER connect the vacuum to

an AC power source or other DC power supply, it may cause damage to the vacuum or personal injury.
DO NOT put the vacuum into water and keep it away from heat sources or direct sunshine.

After vacuuming water or if the filter has been washed, the water must be removed and the filter screen must be dried.

NOTE:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
2. INTRODUCTION
12V Wet & Dry vacuum cleaner ideal for cleaning vehicles. Unit is powered from a vehicle's cigarette lighter socket and is supplied with brush
nozzle, crevice tool and multi-purpose nozzle. Fitted with LED light for cleaning in dark places such as vehicle foot wells and under seats.
Innovative design allows this unit to be emptied by the use of one button and the 0.4ltr capacity can be checked using the sight window. Unit
is fitted with a removable HEPA filter. Features a 1.5mtr stretchable hose and 3.6mtr power cord, allowing freedom of movement around the
vehicle. Supplied with storage bag.
3. SPECIFICATION
Model No: .................................................................CPV100
Supply: .............................................................................12V
Motor power: .................................................................100W
Capacity: ........................................................................ 0.4ltr
Weight: .......................................................................... 2.1kg
Fuse rating: ................................................................. 10amp
© Jack Sealey Limited
INSTRUCTIONS FOR
WET & DRY VACUUM CLEANER 12V
CPV100
MODEL NO:
Original Language Version
CPV100 | Issue 1 09/04/15

Advertisement

loading

Summary of Contents for Sealey CPV100

  • Page 1 CPV100 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 4.8.1. When suction power is weakened or after the vacuum has been used for a long time, the filter screen and the filter element should be cleaned to get the vacuum performance back. Original Language Version CPV100 | Issue 1 09/04/15 © Jack Sealey Limited...
  • Page 3 Battery Removal Refer to section 4.7 Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.