7.2 Fine-tune of the gas flame
The fine-tune screw for the gas burner is located in the upper part of the gas tap for each burner. Ignite
the relative burner and fine tune the flame on low power with a small screwdriver. If the burner is
connected to a propane gas line, the screw must be tightened.
Fine-tune screw
follows
Version 1.3
Image
Page 13 of 20
Description
Gas tap for each burner
Detail fine-tune screw
Remark: If you use propane G30/G31, then
the screw must be tightened/closed completely.
13.01.2016