Klarstein REINRAUM 2G Instruction Manual page 19

1. The device must be disconnected from the power supply and the container
must be clean and free of dust.
2. The foam filter must be used for wet vacuuming. If you are using the foam
filter for the first time, remove the paper dust bag, if inserted. Make sure the
foam filter is clean and dry. Put the foam filter over the filter grille and place it
carefully.
3. Attach the required attachments or tubes to the suction hose.
4. The on / off switch must be in the '0' (OFF) position before you insert or
remove the plug.
5. Set switch to position 'I'.
6. When you have finished vacuuming, switch the vacuum cleaner off again
(position '0') and pull out the power plug.
7. After use, empty the container and let it dry.
EN
19