Datalogic 94ACC0175 Instructions

INSTRUCTIONS
94ACC0175 Quick Change V-Mount
General Features
With the Quick Change V-Mount it is possible to easily remove or install the VMC on VESA or RAM
mounts without the usage of any tools.
Please note that the Quick Change V-Mount is not compatible with 94ACC0164 UPS Battery Backup
with Speaker.
The pack contains the following components
1. 1x base plate
2. 1x ram or vesa plate
3. 8x M6x16 screws allen key
4. 3x M5x12 screws allen key
5. 8x spring washers M6
6. 8x washers D6.4
Assembling Quick Change V-Mount on the VMC
1
The quick mount base plate (2) is installed on the backside of the VMC (1). To fasten the base plate
use 4 M6x16 (3) screws. On each screw install a spring washer (4) and a washer (5). Torque each of
the 4 screws with 10 Nm.
6
©2017 Datalogic S.p.A. and/or its affiliates. All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S. and the E.U. Rhino is a
trademark of Datalogic S.p.A. and/or its affiliates. All other brand and
product names may be trademarks of their respective owners.
www.datalogic.com
7. 3x M8x16 counter sunk screws
8. 3x spring washers M5
9. 3x washers D5.3
10. Allen tool 4 & 5
5
3