Datalogic VMK-8000 Quick Reference Manual

General Features
The VMK-8000 is a special mount for the BC-80X0 to
attach it to a vehicle, such as a forklift. It is used with the
PowerScan® M8300.
The mount kit contains the following components:
• Battery pack with Magnet for PowerScan M8300
• Support with Magnet for BC-80X0 Cradle
• Vehicle Mount Assembly (Mount Platform, 2 U Bolts,
2 Fixing Bolts, 4 hexagon stop nuts)
Assembling The VMK-8000
Insert Magnets
1. Remove the standard battery pack from the PowerScan
M8300 by unscrewing the retaining screw and extract-
ing the battery pack from the reader handle.
2. Insert the new battery pack containing the Magnet
(included with the kit) into the reader handle. Tighten
the screw to secure.
VMK-8000

Quick Reference Guide

3. Remove the standard support from the Cradle and
replace with the one containing the Magnet (included
in the Kit).
Attach Mount to Cradle
Remove the standard base from the BC-80X0 Cradle as fol-
lows:
1. While holding the Cradle, slide the base forward to
release from the mounting tabs. The Cradle can then be
removed from the base.
2. Place the U Bolts in the grooves on the Vehicle Mount
base, as shown.
VMK-8000
Magnet Support
Quick Reference Guide