Advertisement
ASSEMBLING THE VMK-P096
To assemble the VMK-P096, follow the steps below:
1. Attach the mounting plate found in the BC96XX package onto the VMK-P096 mounting platform by screwing 4 short
screws into the four vertical holes.
Insert the U-bolts into the grooves on the VMK-P096 mounting platform, as shown below
2.
820121300
VMK-P096 Vehicle Mount Kit
Mounting Instructions
Screw
(Rev. A)
May 2022
GENERAL FEATURES
The VMK-P096 is a special mount for the BC96XX,
used to attach the base station to a vehicle, such as a
forklift.
The mounting kit contains the following components:
1 mounting platform
•
2 U-bolts
•
2 fixing bolts and 4 hexagon stop nuts
•
1 wall bracket
•
8 short screws M3x8
•
U-bolt
©2022 Datalogic S.p.A. and/or its affiliates • All rights reserved •
www.datalogic.com
Instructions
;
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Datalogic VMK-P096
Summary of Contents for Datalogic VMK-P096
- Page 1 ASSEMBLING THE VMK-P096 To assemble the VMK-P096, follow the steps below: 1. Attach the mounting plate found in the BC96XX package onto the VMK-P096 mounting platform by screwing 4 short screws into the four vertical holes. Insert the U-bolts into the grooves on the VMK-P096 mounting platform, as shown below...
- Page 2 3. Remove the adhesive strips protecting the mounting tabs on the back of the BC96XX base station (Figure 1), and slide the base station on the metal plate. After aligning the tabs, push up to lock into place (Figure 2). 4. Fix the cradle to the VMK-P096 with two screws (Figure 3) Figure 1...
Need help?
Do you have a question about the VMK-P096 and is the answer not in the manual?
Questions and answers