Beko OWAMAT 12 Instructions For Installation And Operation Manual page 39

EN | FR | NL
BEKO TECHNOLOGIES GMBH
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko-technologies.de
We herewith declare that the products named below conform to the applicable directives and technical
standards. This declaration applies exclusively to the products as delivered. It does not cover components
added at a later stage or modifications made after delivery.
We herewith declare that the products named below and as delivered by us conform to the applicable
directives and technical standards. The products meet the requirements of the building inspectorate approval
of the German Institute for Structural Engineering DIBt.
Product designation:
Type designation:
Drawing numbers:
Approval number:
Approval body:
The products are manufactured at a factory certified according to the German Water Resources Act WHG
(formerly § 19 l WHG).
The internal production control required for the above approvals is ensured by our quality management
system certified according to ISO 9001.
Neuss, 17/12/2012
ÖWAMAT 12, 14, 15, 16
®
Manufacturer Declaration
Oil/water separator
ÖWAMAT 10 / 11
ÖWAMAT 12 / 14 / 15 / 16 without preliminary separator
ÖWAMAT 12 / 14 / 15 / 16 with preliminary separator
S_002_371 ; S_002_310
S_002_254 ; S_002_365 ; S_002_367 ; S_002_369
S_002_255 ; S_002_366 ; S_002_368 ; S_002_370
Z – 83.5. – 9
Deutsches Institut für Bautechnik DIBt
Kolonnenstrasse 30L
D-10829 Berlin
BEKO TECHNOLOGIES GMBH
ppa Christian Riedel
Head of Quality Management
Operating Instructions | Mode d'emploi | Gebruiksaanwijzing
39