Table of Contents
Advertisement
Model
Gas Type
BTU Input*
Minimum Vent Opening
Burner Orifice (Propane/LP)**
* Btu/Hr Rating is the same when unit is converted to Propane/LP gas.
** Number is printed on orifice. Located in NVDWA2 kit when converting to LP gas.
Natural Gas
Propane/LP Gas*
* For use if unit is converted to Propane/LP gas.
ON/OFF SAFETY PILOT VALVE KIT WITH PROPANE/LP CONVERSION
An optional on/off valve/safety pilot kit with a piezo ignitor is available for this appliance. This
system requires no matches, batteries, or other sources to light. You must use this optional
system for Propane/LP conversion.
Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02269-9101
200254-01A
SPECIFICATIONS
FUEL INLET PRESSURE SPECIFICATIONS (W.C.)
Minimum 5.5" W.C. Maximum 10.5" W.C.
Minimum 11" W.C.
Minimum Free Opening Area of Chimney Damper
for Venting (sq. in.) For Factory-Built Fireplaces
Chimney Height
15' (Min)
20'
30'
PRODUCT FEATURES
LOCAL CODES
www.factorybuysdirect.com
FGB14-1
Natural
45,000 BTU/Hr
55,000 BTU/Hr
8" Diameter
205 (mm)
Maximum 11" W.C.
14"
18"
41
47
37
43
33
38
State of Massachusetts: The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
In the State of Massachusetts the gas
cock must be a T-handle type. The State
of Massachusetts requires that a flexible
appliance connector cannot exceed three
feet in length.
FGB18-1
Natural
65,000 BTU/Hr
8" Diameter
8" Diameter
225 (mm)
24"
53
48
43
FGB24-1
Natural
242 (mm)
5
Advertisement
Table of Contents
