Electrical Information - PRO-PULSE ME1013L Operator's Manual

ELECTRICAL INFORMATION

DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, which eliminates the need
for the usual three-wire grounded power cord. All exposed metal parts are isolated from the
internal metal motor components with protecting insulation. Double insulated tools do not
need to be grounded.
WARNING:
The double insulation system is intended to protect the user from shock
resuliting from a break in the tool's internal insulation. Observe all normal safety precautions
to avoid electrical shock.
Technical Specifications
Electric lawnmower
Motor input current
Mains voltage
Iding speed
Blade width
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current). Do not operate this product on direct current (DC).
A substantial voltage drop will cause a loss of power and the motor will overheat. If the product
does not operate when plugged into an outlet, double-check the power supply.
When using a power tool at a considerable distance from a power source, be sure to use an
extension cord that has the capacity to handle the current the product will draw. An undersized
cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart below to
determine the minimum wire size required in an extension cord. Only round jacketed
cords listed by Underwriter's Laboratories (UL) should be used.
When working outdoors with a product, use an extension cord that is designed for outside use.
This type of cord is designated with "WA" on the cord's jacket.
Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.
It is possible to tie the extension cord and power cord in a knot to prevent them from becoming
disconnected during use. Make knot as shown, then connect the plug end of the power cord into
the receptacle end of the extension cord. This method can also be used to tie two extension
cords together.
**Ampere rating (on product data plate)
0-2.0 2.1-3.4 3.5-5.0
Cord Length Wire Size (A.W.G.)
25 16 16 16
50' 16 16 16
100' 16 16 14
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
WARNING:
Keep the extension cord clear of the working area. Position the cord so that
it will not get caught on lumber, tools, or other obstructions while you are working with a
power tool. Failure to do so can result in serious personal injury.
WARNING:
Check extension cords before each use. if damaged replace immediately.
Never use the product with a damaged cord since toching the damaged area could cause
electrical shock resulting in serious injury.
28 ME1013L
ME1013L Cut height
10 Amp
Protection class
120V~,60HZ Protection type
3,300 RPM Weight
.. Grass box capacity
13 inch
5.1-7.0 7.1-12.0 12.1-16.0
16 14 14
14 14 12
12 10 —
1.18" / 1.77" / 2.36"
23.29 LBS
8.7 GAL(33 L)
!
!
!