Operating Your Acoustic Wave Music System; Operating With The Remote Control - Bose Acoustic Wave music system Owner's Manual

Operating Your Acoustic Wave

Operating with the remote control

You can use the remote control (Figure 5) to operate most functions of your
Acoustic Wave
however, you need to use the CD Mode button on the system control panel.
If the remote stops operating, or its range seems reduced, try replacing the
battery. However, keep in mind that lighting and other room conditions, in
addition to battery age, can affect the operating range of an infrared remote
control.
Note: The remote control feature does not work when operating your
Acoustic Wave
to conserve battery power. See "Operating on battery power" on page 10.
Figure 5 Press to turn the system
on to the last source
®
The Acoustic Wave
music system remote
control
Press and hold to
raise or lower the
system volume.
Press to silence
the music system.
Press to stop
the CD player.
Press to play or
pause a CD.
Press to play next/previous CD track.
Press and hold to scan forward/
backward through CD tracks.
8
®
Music System
®
music system. For CD repeat and random play modes,
® music system on battery power. This function is disabled
selected, or off.
Seek
On
Tune
Off
FM
Volume
AM
Mute AUX
CD
Skip
Scan
Acoustic Wave Music System
October 16, 2001
Press briefly to tune the next strong
station, or press and hold until you
reach the desired station.
Press to turn on the
radio to the last AM/FM
station selected.
1
Press to tune to a
preset radio station.
2
3
4
Press to play an
auxiliary source
connected to your
5 system.
Presets
AM253543_03_V.PDF