In accordance with the German BGV A3 electrical equipment has to be examined in regular intervals. The equipment must be set up on a suitable stable, level surface. Detergents which contain highly flammable substances must not be used. Use only detergents approved by DENIOS for this unit. 3. Technical data Dimensions (WxDxH)
The bio.x parts cleaning unit is used to clean oil and grease from work pieces in an efficient, environmentally sustainable way using exclusively cleaning fluids authorised by DENIOS. Other detergents such as degreasers or alkali cleaning agents must not be used! Solvents, disinfectants, alkali or acidic fluids, carburettor and diesel fuels or turpentine must not be poured into the appliance.
Page 6
Cleaning position Operating position bio.x T700 160416 Page 6 of 16 10/2008...
If such damage is found, do not connect the unit to the mains. Report damage immediately to the carrier who delivered the unit and to DENIOS AG at the service number indicated above. The original packaging should be kept.
30 seconds. The water pump automatically switches off after about 60 minutes. The Parts Cleaning Unit can also be switched on and off by pressing the multi-control button on the control panel. Take out the cleaned parts. bio.x T700 160416 Page 8 of 16 10/2008...
For this purpose the suction filter can be moved to an elevated position and with the help of the cleaning nozzle (set to surface jet) freed from deposits. If the suction filter is so dirty that it can no longer be cleaned in this way, it has to be replaced. bio.x T700 160416 Page 9 of 16 10/2008...
5 x 20-litre canisters 130030 8.9 Replacement parts (see also product description page 5) Accessories Description Item number Set hood 162350 Filter housing Fine filter (161718) 160703 Replaceable filter set (200 μm) 162522 bio.x T700 160416 Page 10 of 16 10/2008...
According to the electronic and electrical appliance regulations, owners of disused appliances are legally required to dispose of such items separately. Please help to protect the environment by not disposing of disused appliances with household waste. bio.x T700 160416 Page 11 of 16 10/2008...
If overheating is not caused by the temperature sensor being in the wrong position, a service technician must be called in to find the cause and make necessary repairs. bio.x T700 160416 Page 12 of 16 10/2008...
13. EC Declaration of Conformity EC Declaration of Conformity For the purpose of the EC Machinery Directive 98/37/EC, Annex II A Herewith we, the DENIOS AG, Dehmer Straße 58-66, 32549 Bad Oeynhausen, declare that the design of our product: Cleaning Table bio.x...
Page 16
DENIOS AG Dehmer Straße 58-66 32549 Bad Oeynhausen Tel.: +49 (0)5731 7 53 – 0 Fax: +49 (0)5731 7 53 – E-Mail: info@denios.com You`ll find your local partner on our InterNet side www.denios.com bio.x T700 160416 Page 16 of 16 10/2008...
Need help?
Do you have a question about the Bio.X T700 and is the answer not in the manual?
Questions and answers