Cleaning The Drain Pump - Bosch Axxis WFL2090UC Operating And Installation Instructions

q Push down the insert until it clicks into place.
q Reinsert the detergent dispenser into place.

Cleaning the drain pump

This is necessary if the water cannot be drained
completely. This could result if the pump is blocked
by debris or accumulated lint.
Draining the water
Up to 20 litres/4.4 gal may be drained. Have a
suitable container ready.
CAUTION
Avoid risk of scalding!
Allow the hot water to cool.
Keep children and pets away from the washing
machine.
q Turn the program selector to Off.
q Fold down the cover panel.
20
160 °F/
71 °C
max.
q Unscrew the pump cap slightly until the
washing solution slowly begins to run into the
cover plate cavity.
q When the cover plate cavity is half full, tighten
the pump cap and empty the cover plate
cavity.
Repeat the last two steps until all the washing
solution has been drained.
q Completely remove the pump cap.
q Remove any loose debris/lint from inside the
pump and clean the pump. The pump impeller
must be able to rotate.
Clean any remaining water or lint from the
threads of the pump cap and pump housing.