Unpacking And Installation - Audio Note CDT One/II Owner's Information

GENERAL
Congratulations
on your purchase of the Audio Note
Audio Note is highly critical of the digital medium as presented by compact disc; we
sincerely hope that you too will find this transport breaks free from the 'digital mould' that we
are all so accustomed to, and so open a new window on your CD collection.
Please read over this manual carefully in order to obtain the best possible performance
and longevity from your transport.
UNPACKING & INSTALLATION
Please take care when unpacking the
packing materials in case the unit requires shipping at a later date.
Next, select a suitable location for the unit, for example, a dry and dust-free area which
is not exposed to direct sunlight.
Connections:
The transport's sonic performance will start to improve as the internal parts 'bed' in.
The transport requires about two hundred hours of operation before the bedding in process is
complete.
Digital output connectors on the back of the
connection to your DAC via your digital interconnect with RCA or XLR connectors. Your dealer
can advise on suitable type and quality of cable eg: - Audio Note AN-V is an excellent choice.
Mains connector: An IEC power connector is available for connection to mains using the
supplied mains cable.
Mains switch is located on the back of the
CDT One/II
CD Transport.
CDT One/II.
We recommend that you store the
CDT One/II
unit provide a digital output for
CDT One/II
just above the mains socket.
3