Switch Operations - Fujitsu UTY-XDZX Installation Manual

_8. Switch operations_
The unit has 2 Switch
Setup Switch
10 seconds push
(Hold until LED 3 blinks rapidly)
Reset Switch
Short push
Safe mode
Hold down both Reset and Setup
switches until magenta LED3
_9. Startup and Test
Please confirm that the entire system including external device operates normally.
(If only the outdoor unit operates, it may cause damage to the entire refrigerant system.)
Before turning on power for the first time please double check all wiring to avoid damage to unit and/or external equipment.
1. Turn on power.
2. Connect to unit W-LAN EcoSmart_xxxx using your smartphone, tablet, PC, or MAC.
3. Open web browser and go to unit website 192.168.0.1
4. Note down 6 the digit alphanumeric device code.
5. Follow the instructions to configure W-LAN connection and select outdoor unit and refrigerant type.
6. Go to https://ecosmart.cloud and make account and claim the device using 6-digit alphanumeric device code.
Reading of status, setting of parameters and simulation of demand may be done from https://ecosmart.cloud
※If you want to know system status, please check 3 LED's(Reference Contents 7)
If it makes mistake to choose the outdoor unit and refrigerant type, it causes the damage and trouble for the outdoor unit.
Please make sure to check the connecting outdoor unit model and choose the proper outdoor unit type on website.
Operation environment (Personal computer environment)
Items
CPU
Memory
HDD
Display
Interface
OS
Browser
_10. Check List (Example)_
Pay special attention to the check item below when installing the entire system.
After installation is complete, be sure to check the following check item again.
Does temperature sensor detect proper temperature with
operation?
Are the wirings between each device correct?
Are the installed outdoor unit and the selection of outdoor
unit by webpage matched?
Are the external device and DX-kit operating as expected?
Has the AHU of 3rd party been installed correctly?
Has there been a check for F-gas leakage (refrigerant pipes)?
Stored W-LAN network configuration reset.
System will after next restart connect to EcoSmart network if found.
Restart the device and enter W-LAN and outdoor unit configuration mode.
Used to force the unit to connect to cloud without starting user application.
Run_
2GHz or higher
2GB or more
10GB or more of free space
1366 x 768 or higher resolution
Ethernet port (Ethernet port is required for remote connection using internet.)
Or Wireless LAN port
Windows 10
Internet explorer 11 / Google Chrome ver.75
Check items
Contents
Contents
Contents
CAUTION
If not performed correctly
No operation, heat or burn damage
No cooling, No heating
No operation, heat or burn damage
No operation, heat or burn damage
No cooling, No heating
No operation, heat or burn damage
Vibration, noise, indoor unit may drop
No cooling, No heating
Page 7 of 8
Contents
Check box