Control Panel - Weber Klassik Series User Manual

Control panel

1 Minus button to decrease the value for the distance to the machine.
2 Plus button to increase the value for the distance to the machine.
3 Minus button to decrease the rim width value.
4 Plus button to increase the rim width value.
5 Minus button to decrease the value for the rim diameter.
6 Plus button to increase the value for the rim diameter.
7 Button for switching to the static balancing programme/ motorcycle balancing
programme.
8 Button for switching between ALU balancing programs.
9 Button to switch to calibration mode.
10 Button for the optimization function and the split program.
11 "Fine button" for the gram-accurate display of the imbalance values.
12 Stop button and selector button for special functions.
13 Start button to start balancing.
Operate the control panel only with your fingers, never with sharp objects such
as e.g. screwdrivers, weight bars, etc.
4 5
8
8 9 10
7
-10 -
11 12 13