Table of Contents
Advertisement
Opening the synth
WARNING: Take necessary precautions against ESD before opening the synth.
Disassembly Nord C1
1. Remove the 4 screws (40290) holding the panel to the wood gables.
2. Remove the 6 screws (40018).
3. Lift of the upper lid (40273).
4. Disconnect the 26 pole ribbon cable (23830) to the mainboard.
Removing the Panelboard
1. Pull off the knobs (22900).
2. Disconnect the 26 pole ribbon cable (23830).
3. Remove the 12 screws (40262) holding the panelboard.
Clavia DMI
Service manual Nord C1 Combo Organ rev. 1.0
Page 8
Advertisement
Table of Contents
