Connecting Devices To The Notebook; Disconnecting Devices From The Notebook - Fujitsu Siemens Computers ESPRIMO Mobile Port Replicator Getting Started

Connecting external devices

Connecting devices to the notebook

Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Connect all the cables to the notebook and the external devices.
4. Plug all data communication cables into the appropriate ports for the data networks.
5. Plug all power cables into the mains outlets.
Please note that connected external devices can discharge the battery of the
notebook if no mains adapter is connected to the port replicator.

Disconnecting devices from the notebook

Devices:
1. Turn off all power and equipment switches.
2. Remove power plugs from the mains outlets for all devices.
3. Unplug all data communication cables from the ports for the data networks.
4. Disconnect all the cables from the notebook and the external devices.
Information about the connections on your notebook can be found
in the corresponding EasyGuide.
The "Professional Notebook" manual supplied with your notebook includes
a section titled "Connecting external devices". This chapter describes how
to connect external devices (e.g. mouse, printer).
8 - English A26391-K260-Z140-1-8N19, edition 1