Disconnecting The Notebook From The Port Replicator; Connecting External Devices - Fujitsu Siemens Computers ESPRIMO Mobile Port Replicator Getting Started

Disconnecting the notebook from the Port Replicator

If you disconnect the notebook from the Port Replicator during operation, problems
can occur. We recommend that you first switch off the notebook or disconnect the
notebook via the corresponding function in the operating system.
► Switch the notebook off.
1
► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.
► Lift off the notebook (2).

Connecting external devices

Peripherals,see Devices Devices: Externaldevices,connecting
Under all circumstances, please observe the safety notes provided in
the "Important notes", Page 2
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug.
Follow the steps below in order, when connecting or disconnecting
devices to your notebook:
A26391-K260-Z140-1-8N19, edition 1
2
chapter.
Connecting external devices
English - 7