Connecting The Mains Adapter To The Port Replicator - Fujitsu Siemens Computers ESPRIMO Mobile Port Replicator Getting Started

Preparation for use and operation

Connecting the mains adapter to the Port Replicator

► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the mains adapter (2).
► Plug the power cable into the mains socket (3).
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
4 - English
1
A26391-K260-Z140-1-8N19, edition 1
2