Kohler K-1122-LA Roughing-In Manual page 2

16"
(40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Bath whirlpool with integral
apron, left drain
Bath whirlpool with integral
apron, right drain
Fixture*:
Bathing well
Basin area bottom 45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top 52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight 135 lbs (61.2 kg)
To overflow
Water depth 15" (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: Hp
1-speed 1.25
Pump is supplied with 24" (61 cm) grounding-type plug-in
cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1063752-1-B
60" (152.4 cm)
3/4"
(1.9 cm)
K-1122-LA shown
K-1122-RA not shown
V Hz A
120 60 7
120 V, 15 A, 60 Hz
No change in measurements if connected
with drain illustrated. (K-7272)
19"
(48.3 cm)
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
32" (81.3 cm)
Kohler Co.