Advertisement
MACHINES / RECLAIMS
1.
Remove plastic from machine.
2.
Remove lag bolts from each of the
four legs, then remove machine
from the pallet.
3.
Attach filter bag to BLOWER outlet
with hose clamp
4.
Connect motor male plug, to
female plug cord from the light box.
5.
Connect compressed air supply to
fitting provided on left rear leg of
the machine. Air piping should be
of the same size as the connection
point, offering no restriction to flow.
(DO NOT USE QUICK-DISCONNECTS)
6.
Connect the factory installed
ELECTRICAL cord from light box,
to a 120-Volt, 60 HZ, 1 Phase
power supply. A 20 AMP breaker
or fuse should be used.
MAKE SURE MACHINE IS PROPERLY
GROUNDED.
SET-UP INSTRUCTIONS
*** READ BEFORE OPERATING EQUIPMENT ***
WITH DUST BAG
PAGE 1
Advertisement
