Advertisement
Table of Contents
- 1 Getting Started
- 2 Configure, Re-Configure or Modify Your Logger Settings
- 3 Using a Pre-Configured LED-Logger
- 4 Starting & Stopping the Logger
- 5 Reading the Logger
- 6 Connecting to the Device & Retrieving Data
- 7 Reading the Temperature Data
- 8 Reading the Temperature and Humidity Data
- Download this manual
Advertisement
Table of Contents
Related Manuals for Spotsee LOG-IC 360
Summary of Contents for Spotsee LOG-IC 360
- Page 1 LOG•IC 360 Data Logger Manual ®...
- Page 2 3. Configure or modify an unused Single-use or any Multi-use PDF logger. You can adjust these settings: a. Sample Time b. Measures c. Celsius or Fahrenheit d. Start Delay e. Alarms 4. Select Save Settings This document is written and published by SpotSee All rights reserved.
- Page 3 Blinking Orange | In the Running or Stopped State, a blinking orange indicator identifies a high alarm has been triggered. Fixed Orange | In the Running or Stopped State, a fixed orange indicator identifies an ultra-high alarm has been triggered. This document is written and published by SpotSee All rights reserved.
- Page 4 | 937.429.2114 | info@americanthermal.com Rev: 12/2020 This document is written and published by SpotSee All rights reserved. ATI20-064 ATI SW LOG-IC 360 PDF Electronic Data Loggers Users Guide ATI20-064 ATI SW LOG-IC 360 PDF Electronic Data Loggers Users Guide...
Need help?
Do you have a question about the LOG-IC 360 and is the answer not in the manual?
Questions and answers