Valley Electronics Daysy Instructions For Use Manual page 11

1. Every morning before you get out of bed, pick up Daysy and press the
activation button. The activation ring will light up quickly, and your
predicted fertility status will be displayed.
2. Press the button once more, and the lights of the activation ring will start
rotating clockwise.
3. Place the sensor tip under your tongue, as far back as possible, and close
your lips around the neck of Daysy.
4. Wait until you hear 2 beeps.*
5. Daysy now shows today's fertility status. To review your fertility status later
in the day, simply press the activation button, and your status will display.
*If Daysy did not successfully take your temperature you will hear a grumble buzz.
8
If this happens please try again. Measurements normally take around 60s.