Subscribe to Our Youtube Channel
Related Manuals for Vibe SA-k Series
Summary of Contents for Vibe SA-k Series
- Page 1 Instruction Manual To ensure maximum performance and safety, please follow this manual. Please retain the manual for future reference after installation.
- Page 2 This instruction manual is for your safety and must be adhered to at all times. Please read ensure that you fully understand the installation and set up procedures as explained and if you are unsure on the installation or set up of your VIBE SA-k Series components/ coaxials please contact your nearest authorised VIBE dealer.
- Page 3 Installation The quality of the installation will affect the system performance and reliability. Contact your nearest authorised VIBE dealer if you are unsure on the installation of this product. Please be sure to mount this unit away from anty potential hazards.
- Page 4 For Coaxial Fitment ● Cut if necessary any material to allow the correct seating of the speaker, using the hole cut out template enclosed. ● If using grill ensure the plastic ring is seated behind the speaker at this point. ●...
- Page 5 For Flush Mount Component Fitment ● Follow steps 1 and 2 as detailed before in coaxial fitment for the positioning of the woofer. ● Locate a suitable position for the in line crossover unit. This should not interfere with any moving parts. ●...
- Page 6 For Surface Mount Component Fitment ● Follow steps 1 and 2 as detailed before in coaxial fitment for the positioning of the woofer. ● Locate a suitable position for the in line crossover unit, this should not interfere with moving parts. ●...
- Page 7 Specifications...
- Page 8 VIBE. graphics, logos, are trademarks or trade dress of VIBE Technologies Ltd or its subsidiaries. VIBE's trademarks and trade dress may not be used in connection with any product or service that is not VIBE's, in any manner that is likely to cause confusion among customers, or in any manner that disparages or discredits VIBE.
Need help?
Do you have a question about the SA-k Series and is the answer not in the manual?
Questions and answers