Nicols PARLED 1412 FC IP User Manual page 13

DMX 512 Configuration
Channel Function
1 Dimmer
2 Red
3 Green
4 Blue
5 White
6 Dimming speed
7 Strobe
8 Auto Mode
9 Auto Speed
DMX512connections
1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin
2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.
3. Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the input of the next unit.
The cable can not branched or split to a `Y` cable. DMX 512 is a very high-speed signal. Inadequate or damaged
cables, soldered joints or corroded connectors can easily distort the signal and shut down the system.
Value Description
0-255 0-255
0-255 0-255
0-255 0-255
0-255 0-255
0-255 0-255
Dimming speed from fast to
0-255
slow
0-255 Strobe effect from slow to fast
0-99 Color macro
100-119 3 colors change
120-139 7 colors change
140-159 7 colors change smoothly
160-179 Colors fade strobe
180-199 7 colors strobe 1
200-219 7 colors strobe 2
220-240 Color jump change
241-255 No function
0-255 Auto speed from slow to fast