Advertisement
Available languages
Available languages
Important
During the assembly, avoid touching the heating elements (quartz bars) with your hands as this could leave spots and diminish the
thermal radiation.
Usage instructions
0 = Off
1 = 800w power
2 = 1600w power
Do not be alarmed if you notice slight vibrations which gradually fade away, this is part of the appliance's normal behavior.
Maintenance
• Before undertaking any maintenance operation, disconnect the appliance from the power supply.
• this is appliance does not require any special maintenance.to clean it, wipe with a lightly damp cloth and neutral detergent, do
no use abrasives or any material that could damage the appliances surface, check that parts exposed to the heat rays and the
ventilation are free of dust and dirt. During cleaning, make sure not to touch the quartz heating elements.
• In case of breakdown of any parts of the appliance. Disconnect the appliance and contact an authorized service center. Always
use original spare parts which ensure proper quality and performance
• Non-compliance to the indications stipulated in this instruction manual could seriously compromise the appliance's safety and
render the warranty invalid.
Technical Data
4 Heating Elements
Two functions: 800W/1600W
Tip over and Overheating protection system
Metallic Construction
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice
unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages
of the manual of the purchased product may also refer to other models of the manufacturer's product range, with similar features,
other than the product you have purchased.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will
be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of
the manufacturer.
3
www.BormannTools.com
Advertisement
