BorMann HOME BEH3500 Owner's Manual page 2

General information
• Please read these instructions carefully before carrying out any operations with this appliance. Keep this manual in a safe place
for future references.
• Before removing the packaging, make sure the appliance is in perfect conditions. If it is not, return to the point of purchase.
• The packaging materials contain plastic and other materials, therefore please store them out of the reach of children.
Electrical connection
• Before connecting the appliance, make sure that the appliance's rating plate corresponds to the local power supply network.
• The appliance's electrical safety can only be guaranteed when it is grounded and used correctly.
• This appliance has been manufactured in compliance with directive 89/336 cee concerning electromagnetic interference.
Important warning
• We strongly recommend that the electrical installation be carried out by qualified professional personnel.
• Do not install the appliance close to bathtubs, showers, washbasin or swimming pools.
• The appliance is intended for heating, any other use could be dangerous. The manufacturer shall not be responsible for such
damages.
• Do not place a cover or other objects over the appliance as they could catch fire during use!
• Do not use accessories or equipment not provide by the manufacturer
• Install the appliance only in its horizontal position
• Do not install the appliance close to any electrical lighting appliance
• Avoid placing the appliance behind doors 0 close to furniture.
• Heater is forbidden to be put under the out let directly.
Installation
Keep a sufficient distance between the appliance and walls or objects.
For fixture to a wall, proceed in the following manner:
1. Unscrew the screw that marks the desired inclination of the appliance with regard to the wall it will be fixed on.
2. Screw the wall support to the end of its travel
3. Unscrew the screw which holds the cover of the wall support and then remove the cover.
4. Determine the appliance's placement and with the help of the 2 holes, insert it in the wall.
Electrical connection
• This appliance must be grounded.
• This appliance is intended for fixed installation, one with a permanent electrical connection.
• The cable must have sufficient power consumption.
• Material: PVC
• Nr, 3 cables (neutral, live and ground)
• Once the electric cable in inserted through the wall support. Attach the support using the supplied screws and dowels which
were previously into the wall
• Remove the screw from the cable clamp and place the cable in the provided seat, make sure that the wire connections
correspond to the symbols marked on the support.
Attention: this appliance must be grounded!
The cables' colors are as follows:
Green and yellow: ground
Blue: neutral
Brown: live
The green and yellow cables must be connected to the terminal marked with the letter and ground symbol.
The blue cable must be connected to the terminal marked with the letter n or color black
The brown cable must be connected to the terminal marked with the letter l.
Clamp the cables, replace the cover and screw it on the wall, regulate the appliance's inclination on the wall and fix it permanently
on the wall.
2
GB
www.BormannTools.com