Advertisement
Assembly
1. Remove all parts from the shipping container(s).
Remove all packing material from the parts. Recycle
shipping and packing materials in accordance with the
recycling codes of your location.
Place the base upside down onto the floor (seat top on
floor, frame legs up in air).
2. Choose the H-frame leg assembly and line up with
two frame legs. ActiveAid recommends the H-frame leg
assembly is used across the seat opening side of the unit.
3. Depress the snap buttons and slide the H-frame leg
assembly onto the frame.
Note: The H-frame assembly goes with two frame legs on
the same side of the unit, not opposite corners.
3
No tools are required for setup
1.
2.
3.
Advertisement
