Page 2
Read this entire manual before operation begins. Record below the following information which is located on the serial number data plate. Serial No. Model No. Date of Installation...
Page 3
Contents Specifi cations ... . . 4 Installation ....5 Exploded View ... . 8 Parts List .
• Can be used seperatly or match with lifts (four post, PX scissors, etc.) • Adjustable adapters assembly The structure of the RJ-6000 is the same between two version, but the standard is matched with air pump while the manual is matched with a hand pump.
Lift Vehicles Choose the suitable adapters (Fig. 3) Extend the upper extension to proper length to fi t the lifting point of the vehicle (Fig. 4) Upper Extensions 2.5”, 1.5” adapters Fig. 3 Fig. 4 RJ-6000 Installation...
Page 6
(Fig. 6) First tighten the rotation switch Press Down And Fill With Air clockwise Fig. 5 And then press the hand pump handle up and Lock The Jack down to fi ll the air in. Fig. 6 Installation RJ-6000...
Page 7
To lower the jack, press the control plate of the air pump (automatic), or loosen the rotation switch of hand pump counter clockwise (manual). Adjust the rotation switch of hand pump counter-clockwise to lower Press The Control Plate Down Fig. 9 Fig. 10 Installation RJ-6000...
Self locking Nut 680032 Scissors Pin 420146 Fitting For Air line 670002 Air Pump 670005 Throttle valve 690016 Oil Hose 420097 Straight fi tting 720070 J6H oil hose 209043 Hex Bolt 690002 Hand pump 209021 Hex Bolt Parts List RJ-6000...
Page 10
Support Ring 27-2 670006 Head Cap 27-8 201030 Y Ring 27-3 670007 Bore Weldment 27-9 201030A Support Ring 27-4 670008 Piston Rod 27-10 206069 O Ring 27-5 670009 Piston 27-11 206071 Hex Bolt 27-6 201031 O Ring Parts List RJ-6000...
Need help?
Do you have a question about the RJ-6000 and is the answer not in the manual?
Questions and answers