PROLUMIA ECODISC II MAXI Operating Instruction page 4

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
SAFETY PRECAUTIONS
The user must observe the safety notes and warnings in order to maintain this status and to ensure safe operation. Please read the operating
instructions before start up. Never attempt to open the device other than described in this manual. The LED luminaire cannot be repaired; this
part must be immediately disposed in case of a defect. Ensure sufficient ventilation of the device. Never cover it during operation. Do not install
in reach of children or animals.Any other use of the device than described above can damage the product or endanger the user due to e.g. short-
circuits, fire or an electric shock. The entire product may not be modified or adapted.
These safety notes must be observed in all cases! Any warranty claim is void in the case of damages caused by non-observance of these
operating instructions. We are not liable for consequential damages or for damages to property or persons caused by non-observance of the
safety notes and improper operation of the device.
Safe operation is not possible anymore, if:
• the LED luminaire has visible damages
• the LED luminaire does not work anymore
TECHNICAL DATA
Supply voltage: 220-240V 50/60Hz
Light source: SMD 2835 LED
Operating temperature: -20°C - +40°C
Electrical safety class: Class I
INSTALLATION INSTRUCTIONS
Included:
1x LED fixture
1x mounting accessories
1x manual
1
5
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
4
Attention!
• Installation only by persons with electro technical knowledge and experience.
• Use cable which is suitable for outdoor use (if mounted outside).
• Do not use a dimmer to operate this luminaire.
2
6
www.prolumia.com
TECHNICAL INFORMATION
Input Light
Art. no.
power output
40009922 23W 2150Lm
40009923 24.5W 2150Lm
3
7
Color temperature
Sensor
switchable
3000K, 4000K and 6500K -
3000K, 4000K and 6500K Yes
4
8