Smart Motion Detection - Lorex N844 Series Quick Setup Manual

Smart motion detection

Smart motion detection is enabled by default.
To configure smart motion detection settings:
1. From the camera's live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click EVENTS > Event Settings > Motion > Smd/Deterrence.
4. Configure the following:
a. Under Camera, select the
channel connected to a
smart motion detection
camera.
b. Check Person and/or Vehicle
to disable or enable each
type of smart detection.
c. Click Set > Area under each
detection type you have
enabled to set the active
areas.
d. Click Set > Schedule to set
the weekly schedule.
e. Click Apply to save.
a
e
b
c
d
13