Fanimation TR20WH Specification And Instruction Sheet page 2

6. Replace battery cover on remote control. Be sure
the hole of battery cover firmly into the tab. (Figure 4)
How to Install Your Remote Control (Option #1)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 3/4"
screws. And push the four plastic plug to cover the
screw holes. (Included in the control packaging).
(Figure 2)
How to Install Your Remote Control (Option #2)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 1"
screws. And push the four plastic plug to cover the
screw holes (Included in the control packaging).
(Figure 2)
Figure 4
Figure 1
Figure 1
Figure 2
Figure 2