Advertisement
INSTRUCTION SHEET
Side Mount Flange Clips
Figure 5
C and Z Purlin
Figure 6
Part Number Figure
Offset Bracket
Figure 8
1. Nail or screw clip to structure
2. Press MC/AC cable into clip
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
TECHNICAL SUPPORT:
www.erico.pentair.com
1. Using hammer,
tap clamp onto flange
Part Number Figure
MAC224SM
1 or 2 runs of MC/AC to 1/8" [3] through 1/4" [6] flange
MAC258SM
1 or 2 runs of MC/AC to 5/16" [8] through 1/2" [13] flange
5
MAC2912SM
1 or 2 runs of MC/AC to 1/2" [13] through 3/4" [19] flange
1. Press fastener against flange,
tap straight down
(1/16" to 1/4" flange or C purlin)
2. Press MC/AC cable into clip
MAC2VF14
6
1 or 2 runs of MC/AC to 1/16" [2] through 1/4" [6] C purlin or vertical flange
MAC2123
7
CFS242_F
Rotate clip
as needed
Application
Figure 7
Application
1 or 2 runs of MC/AC to Z purlin
Part Number Figure
MAC2AO
8
Offset bracket for 1 or 2 runs of MC/AC cable
3 OF 4
© 1997-2017 Pentair All Rights Reserved
2. Twist clip into required orientation
3. Press MC/AC cable into clip
Application
Advertisement
