Behringer BLUE DEVIL GX112 User Manual page 9

All manuals and user guides at all-guides.com
+
When the MIDI functions are inactive, one effect can be stored for each of the two channels on
your BLUE DEVIL, which allows you, for instance, to select a DELAY effect for the HELL
channel and assign a REVERB/CHORUS effect to the HEAVEN channel. The corresponding
program numbers will be stored with the channels and can be recalled using the footswitch or
the front panel buttons. When MIDI is on, this assignment feature will be disabled, so that in
this mode both channels and effects can be selected separately.
STATUS
13
s
+
The store enable mode (see chapter 3.2.1) allows you to store presets directly via MIDI. Please
note that by sending MIDI controller #18 values, any changes made to the currently active
preset will be irrevocably stored.
+
If the multi-functional MIDI LED flashes briefly, this indicates that the DSP module’s output level
is close to distortion. In this case, you should turn down the VOLUME control a bit. This
clipping indicator is only available if you actually do not edit any parameter.
s
s
s
s
s
EFFECT
14
PARAMETER
15
EFFECT A
16
first
EFFECT B
17
secondary
+
When you start editing a preset, the decimal point in the 2-digit display starts flashing. Press
the ENTER button for a while to overwrite the factory preset and save your own effect setting.
To restore the factory presets, simply press and keep the ENTER button while you switch on
the BLUE DEVIL.
AUX
18
VOLUME
19
left
right