Advertisement
Tools/Outils/Herramientas
Silicone Sealant
Masking Tape
Joint en silicone
Ruban-cache
Sellador de silicona
Cinta de enmascarar
Before You Begin
CAUTION: Risk of injury or product damage. Do not attempt to cut tempered
glass.
IMPORTANT! If you purchased model 660B/SP, this bypass bath/shower door
includes two sets of wall jambs, tapered and non-tapered. If you are installing the
door to a Sterling bath/shower unit or a unit with a taper in the lower wall, use the
tapered set. For all other bath units, use the non-tapered set. Discard the unused set.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8" (1
cm) out of plumb. Verify the area the door will be attached to is within 3/8" (1 cm)
or better of plumb. The door may not function properly if the wall is more than 3/8"
(1 cm) out of plumb.
Before beginning the installation, measure the dimensions of the opening and
confirm the model of door you are installing is the correct size.
Use a drop cloth to protect the floor surface of the bath or shower during the
installation.
The bath/shower should be installed at this time, including finished wall
materials.
Cover the drain with masking tape to prevent parts from being lost.
Avant de commencer
ATTENTION: Risque de blessure ou d'endommagement du produit. Ne pas
tenter de découper le verre trempé.
IMPORTANT! Si le modèle 660B/SP a été acheté, cette porte coulissante de
baignoire/douche inclut deux jeux de montants de mur, coniques et non coniques.
Dans le cas d'installation de porte sur une unité de baignoire/douche Sterling ou une
unité avec un biseau dans le bas du mur, utiliser le jeu conique. Pour toutes les autres
unités de baignoire, utiliser le jeu non conique. Jeter le jeu non-utilisé.
1113654-2-C
Plus/Plus/Más:
• Drop Cloth/Toile de protection/Lona
Hacksaw with 32 Teeth
per Inch Blade
Scie à métaux avec lame
à 32 dents par pouce
Center Punch
Poinçon
Sierra para metales con hoja
Punzón
de 32 dientes por pulgada
2
Sterling
Advertisement
