Maintenance; Cleaning The Appliance - LG CordZero A9 Owner's Manual

MAINTENANCE

Cleaning the Appliance

Before Cleaning the Appliance
• Turn off the power before cleaning the
appliance.
• To maintain the optimum suction power, the
Cyclonic Mesh Filter, the exhaust filter and the
pre-filter should be cleaned at least once a
month.
• The pre-filter will wear out with time and
use and will eventually need to be replaced.
Contact the customer service department of LG
Electronics if the problem persists.
Removing Foreign Objects
In order to maintain product performance, be sure
to remove any foreign objects and dust from inside
the product body, extension pipe or air inlets.
• Foreign materials inside the product can cause
noise, have poor suction, or shut down during
operation.
• If the inside of the product body, extension
pipe, inlets, pre-filter, or exhaust filter is
clogged with foreign objects, the power
automatically turns off to protect the appliance.
Separate the battery from the product body and
remove the foreign objects before resuming
use of the appliance.
32
Cleaning the Dust Bin
Empty and clean the dust bin after every use.
• If the dust bin is completely full of dust or the
filter is clogged, the suction power may be
reduced.
1
Remove the battery from the product body
before cleaning the dust bin.
2
Press the dust bin cover release button a to
open the dust bin cover. Empty the dust bin by
shaking.
• Be careful as dust or foreign objects may
spill out when opening the dustbin. Empty
the dust bin into a wastebasket or where
dust and foreign objects can be emptied
easily.
3
Insert the crevice tool c into the Cyclonic
Mesh Filter b and turn it counterclockwise to
remove the filter.
EN