1. Manuals
  2. Brands
  3. Indian Creek Design Manuals
  4. Paintball equipment
  5. BushMaster Series
  6. User manual

Indian Creek Design BushMaster Series User Manual

Hide thumbs Also See for BushMaster Series:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL-STAND
6/3/04
10:20 AM
Page 1
B2K STANDARD
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Indian Creek Design BushMaster Series

Summary of Contents for Indian Creek Design BushMaster Series

  • Page 1 MANUAL-STAND 6/3/04 10:20 AM Page 1 B2K STANDARD USER’S MANUAL...

  • Page 2: Statement Of Liability

    No part of this document may be copied or reproduced in any form or by any means without the prior written consent of the manufacturer. Paintball markers get a lot of abuse. Indian Creek Design, Inc., has built the B2K with this in mind. All internal parts, wear and contact surfaces have been heat treated or hard Trademark Notices: anodized.

  • Page 3: Operation

    MANUAL-STAND 6/3/04 10:20 AM Page 5 B2K STANDARD USER MANUAL OPERATION Adjustable regulator compressed air systems: The input pressure from your compressed air system should be regulated down to 350-500 Read the entire manual before you prepare your B2K for firing. Safety and safe marker han- PSI output pressure.

  • Page 4: Maintenance

    MANUAL-STAND 6/3/04 10:20 AM Page 7 B2K STANDARD USER MANUAL Always keep your B2K pointed in a safe direction! Cleaning Paint from the Barrel Unscrew the barrel with approximately one and one half (1-1/2) revolutions to remove the 1. Place the empty loader onto the marker. Be sure that it is securely mounted in place. barrel for swabbing/cleaning.
  • Page 5 MANUAL-STAND 6/3/04 10:20 AM Page 9 B2K STANDARD USER MANUAL NOTE: Only slight turns are needed to accomplish changes in the pressure used to shoot Your B2K must be clear of all paint and any source of propellant during transportation to and from the playing field.
  • Page 6 MANUAL-STAND 6/3/04 10:20 AM Page 11 B2K STANDARD USER MANUAL Leak Related Problems e. If the ball retention O rings are too sloppy, the ball will not be held in the proper position. This may allow the next ball to enter the path of the bolt, subjecting it 1.

  • Page 7: Limited Warranty

    2. Alternately missed shots. state to state. 3. Velocity drops while firing several shots. For warranty parts, service or information contact: Indian Creek Design, Inc. 1019 First Street North 4. Erratic Velocities. Jumps of 20 fps or more. Nampa, Idaho 83687 5.
  • Page 8 Date of Purchase: _________________________________________________________ Place of Purchase: ________________________________________________________ If you wish to register by mail, you should copy this page, fill it out and mail it to: Indian Creek Design, Inc. 1019 First Street North Nampa, Idaho 83687 You may copy this page, fill it out and fax it to:...

This manual is also suitable for:

B2k

Table of Contents