PowerXL Grind & Go Plus Owner's Manual page 9

Instructions for Use
Making Coffee with Whole Beans
1. Open the Water Reservoir's lid and pour in water,
using the water level indicator on the Water Reservoir
to measure the water according to the number of
cups desired (Fig. A).
NOTE: The appliance uses all the water in the Water
Reservoir. Ensure that you do not add more water
than your desired cup size.
2. Insert the Filter Basket in the Carafe and add coffee
beans. Overfilling the Carafe might jam the grinder.
Add 2 tbsp. of coffee beans (1 scoop) for every 8 oz
of water. More coffee beans can be added for a
stronger flavor. Be sure not to exceed the maximum
of 8 tbsp. (4 scoops).
3. Attach the Grinder Blade to the top of the Carafe
(Fig. B). The handle on the blade will get hot after
using the appliance. Proceed with caution when
handling after use.
4. Slide the Carafe into the appliance and twist so that
the handle aligns with the lock symbol. The handle
should be facing you. If the Carafe is placed properly,
it will click into place (Fig. C).
5. Press the Power button on the Control Panel to turn
the appliance on. The Power button will illuminate.
6. Press the Grind button. The Grind Button will
illuminate and the coffee beans will be ground.
The grinder will automatically stop when the beans
are ground and begin to brew coffee. When the
appliance is done brewing coffee, three beeps will
sound and the appliance will power off.
For brewing pre-ground coffee, see the "Making Coffee
with Pre-Ground Beans" section.
Fig. A
Fig. B
Fig. C
9
PowerXL Grind & Go Plus ™