PowerXL Grind & Go Plus Owner's Manual page 8

Instructions for Use
Before First Use
1. Remove all the packaging material.
2. Remove any stickers or labels from the
appliance.
3. Before initial use, wipe the inside and outside
of the appliance with a warm, moist cloth and
mild detergent. Handwash all accessories.
4. Place the appliance on a stable, horizontal, and
level surface. Do not place the appliance on
a surface that is not heat resistant. Ensure that
the appliance is used in an area with good air
Tips
•
If you buy large portions of beans, separate them
into one- or two-week portions and store them
in airtight containers in the freezer. Preserve
freshness by minimizing exposure to air, light,
and moisture. Once beans are removed from the
freezer, keep them in a sealed container at room
temperature, since damaging condensation
can occur when beans move from cold to
warmer temperatures.
8
PowerXL Grind & Go Plus ™
circulation and away from hot surfaces and any
combustible materials. Do not place on the
stove top even when the stove top is cool.
NOTE: During the manufacturing process, dust
can get trapped in your appliance. We recommend
flushing out the system before brewing your first
pot of coffee by following the instructions in the
"Making Coffee with Pre-Ground Beans" section.
Be sure to use only water and the Filter Basket
when flushing out the system (no coffee).
•
The amount of coffee brewed will always
match the amount of water added to the Water
Reservoir. If you are not using the Tumbler
included with this appliance, you can first
add the water to your coffee mug and then
transfer the water to the Water Reservoir. This will
ensure that the amount of coffee brewed fits in
your coffee mug and does not overfill the mug.
NOTE: Some fine grounds may flow through the
Filter Basket and appear as sediment in the Carafe.