Table of Contents
Advertisement
Quick Links
XOMD24S
DRAWER MICROWAVE
SAFETY PRECAUTIONS
RADIO INTERFERENCE
ELECTRICAL GROUNDING
INSTALLATION INSTRUCTIONS 7
OVERVIEW
INSTALLER - LEAVE THIS MANUAL
3
UTENSILS | FOOD SAFETY
5
CONTROL PANEL
OPERATING INSTRUCTIONS
6
CLEANING + MAITENANCE
WARRANTY
11
WWW.XOAPPLIANCE.COM
I worked really hard
on this manual -
so please read it...
IMPORTANT
WITH THE CUSTOMER
12
13
14
19
20
Advertisement
Table of Contents
Related Manuals for XO Appliance XOMD24S
Summary of Contents for XO Appliance XOMD24S
- Page 1 I worked really hard on this manual - so please read it... XOMD24S DRAWER MICROWAVE IMPORTANT INSTALLER - LEAVE THIS MANUAL WITH THE CUSTOMER SAFETY PRECAUTIONS UTENSILS | FOOD SAFETY RADIO INTERFERENCE CONTROL PANEL OPERATING INSTRUCTIONS ELECTRICAL GROUNDING CLEANING + MAITENANCE...
- Page 2 CONGRATULATIONS on purchasing your XO. Before you proceed, take just a moment to register your XO at: www.xoappliance.com/register-your-product/ REGISTRATION HELPS YOU BY - Ensuring warranty coverage should you need service Providing ownership verification for insurance purposes Let’s XO notify you in the event of product changes or recalls.
-
Page 3: Precautions To Avoid Possible Exposure To Excessive Microwave Energy
(2) HINGES AND LATCHES (broken or loosened) (3) DOOR SEALS AND SEALING SURFACE (d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Specifications Model: XOMD24S Rated Voltage: 120V~60Hz Rated Input Power(Microwave): 1500W Rated Output Power(Microwave):... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including: WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: Read all instructions before using the appliance. Read and follow the section: "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY"... -
Page 5: Radio Interference
IMPORTANT SAFETY INSTRUCTIONS CONTINUED: TO REDUCE THE RISK OF PERSONAL INJURY: 1) Do not overheat liquids. 2) Stir the liquid both before and halfway through heating it. 3) Do not use straight-sided containers with narrow necks. 4) After heating, allow the container to stand undisturbed in the microwave for a short time. 5) Use extreme care when inserting a spoon or other utensil into the container. - Page 6 SAVE AND FOLLOW THESE IMPORTANT GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit. Grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a third prong grounding plug. The plug must be plugged into an outlet that has been properly installed and grounded by a qualified electrician.
-
Page 7: Installation
INSTALLATION WARNING CLEARANCES AND DIMENSIONS For safety considerations, do not install drawer in any combustible cabinetry, which is not in accordance with the stated clearances. UNPACKING YOUR MICROWAVE DRAWER Remove all packing materials from inside the microwave drawer. DO NOT REMOVE THE WAVEGUIDE COVER, located on the top of the microwave drawer. - Page 8 CLEARANCES AND DIMENSIONS Dimensions shown in the figure below must be used. Given dimensions provide minimum clearance. Locate electrical outlet in the shaded area in the upper left-hand corner of the cutout. Contact surface must be solid and level. The floor of the opening should be constructed of plywood strong enough to support the weight of the oven.
- Page 9 INSTALLATION Appliance Dimensions ELECTRICAL OUTLET AND ANTI-TIP BLOCK To reduce the risk of tipping the drawer, the anti-tip block must be properly located 1 4-13/16” above the floor on which the microwave drawer will sit. The 6” anti-tip block must be provided by the installer. The anti-tip block prevents serious injury that might result from spilled hot liquids.
-
Page 10: Grounding Instructions
GROUNDING INSTRUCTIONS This appliance must be grounded. The microwave drawer must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code along with local codes and ordinances. In the event of an electrical short circuit, grounding reduces risk of electrical shock by providing an escape wire for the electrical current. - Page 11 GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN Defrosting Rack Use only in defrosting function Do not use for cooking. Do not use without food. CONTROL PANEL WAVE GUIDE COVER (DO NOT REMOVE) MENU LABEL DRAWER SEALING SURFACES DRAWER LIGHT DRAWE GUIDES VENT NAME PLATE...
- Page 12 UTENSILS FOR MICROWAVE SAFE COOKING NEVER USE IN YOUR AND RE-HEATING USE: MICROWAVE: Glass Ceramic (such as Corningware ) Metal Pans or Bakeware ® Heat Resistant Glass (such as Pyrex ) Dishes with Metalllic Edging ® Microwave Safe Plastics Non-Microwave-Safe Plastics Paper Plates Food Storage Bags Microwave Safe Stoneware / Pottery...
- Page 13 GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN THE CONTROL PANEL Operating Panel PANEL LOCK SENSOR REHEAT POPCORN KEEP WARM OPEN START (+1 min) TIMER | CLOCK SETTINGS SENSOR COOK DEFROST MORE CLOSE STOP | CLEAR POWER LEVEL...
-
Page 14: Clock Setting
GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN OPERATION POWER ON • When the microwave oven is plugged into an outlet, buzzer sounds once. Screen displays “WELCOME” and the oven enter a ready mode. Then the screen displays “00:00”. • In ready mode, the screen will display the current time if the clock has been set. - Page 15 GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN OPERATION - continued MICROWAVE COOKING FUNCTION POWER LEVEL - 10 Power levels are available LEVEL POWER 100% DISPLAY PL100 PL90 PL80 PL70 PL60 PL50 PL40 PL30 PL20 PL10 • Press “TIME COOK” button, Screen will display “00:00”. “FUNCTION” will light.
-
Page 16: Weight Defrost Function
GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN OPERATION - continued MICROWAVE COOKING FUNCTION • In waiting state, instant cooking at 100% power level with 30 seconds cooking time can be started by pressing “START/+30SEC”. Each press on the same button will increase cooking time by 30 seconds. - Page 17 GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN OPERATION - continued AUTO MENU: POPCORN • Press “POPCORN” button. Screen displays “1.75”. “AUTO MENU” and “OZ” indicators will light. • Continue to press “POPCORN” button, “1.75”, “3” or “3.5” will display in order.
-
Page 18: Panel Lock
GET TO KNOW YOUR BUILT-IN MICROWAVE DRAWER OVEN OPERATION - Cont. PANEL LOCK • Lock: In waiting state, press “STOP/CANCEL” for 3 seconds, the oven will enter into the panel lock state. Screen will display the current time if the clock has been set. -
Page 19: Odor Removal
A LITTLE TLC C LEANING- microwave oven EXTERIOR: Clean the exterior of you XO microwave oven with mild soap and water, then rinse and dry with a soft cloth. Never use household or abrasive cleaners or scouring pads. DOOR: Wipe the window on both sides with a soft cloth to remove any spills or food spatter. Metal parts are much easier to maintain if wiped clean frequently with a soft cloth. - Page 20 Be believe in extraordinary customer service with a personal touch. We are putting into practice our vision of becoming the most innovative, customer oriented appliance company in the world. Your New XOMD24S is backed by One Year Parts and Labor Warranty on our Performance Collection For 90 days, our products...